Level is a calm sound-level meter — one big number, up to four of six readings beside it in the order you choose, a flag when the sound is more than the mic can measure, built-in references to set your system by, and the truth about how accurate it is. On-device. Nothing uploaded.
No setup, no account, no calibration wizard. Open the app and the meter is already running.
One big number, updated live. Turn on up to four readings — Leq, Min, L90, L10, Peak, Time — and drag them into the order you want. Max holds your loudest moment on the meter; OVER tells you when the mic couldn't keep up.
Tap play in the control bar — pink noise, white noise, or an octave tone, to any output — and set every speaker to the same number.
A big live readout, the meter beneath it, your peak held automatically, up to four readings beside the number arranged your way, and the controls in one bar at the bottom. Nothing blinking, nothing gamified — an instrument you can read across the room.
A-, C-, or Z-weighted, Fast or Slow response — the standards real meters use, not a made-up scale.
Leq, Min, L90, L10, Peak, and Time — show any four beside the live number and hold one to drag it where you want it. All six are always computed; on iPhone Duo's open display, all six show.
Max holds your loudest moment on the meter until you reset. And when the sound is louder than the mic can measure, Level says OVER and keeps Peak marked — instead of showing a number it can't stand behind.
Pink noise, white noise, and octave tones from 31.5 Hz to 16 kHz — all level-matched, so the meter doesn't jump when you switch.
Import the cal file from a UMIK-1, UMIK-2, EARS, ECM8000, or iMM-6C — or a REW export — and Level applies the correction. When the file carries a 1 kHz sensitivity, that's true SPL. Have a calibrator? Set to 94 dB trims any mic to it in one tap.
The current reading, whichever stats you have on, and the level bar on a styled card — proof of how loud it really was, shared anywhere.
Read it on the cover display, open it tall for the full meter, or start it held wide to put the readout on one side of the fold and the meter on the other.
Play from the control bar and the meter keeps reading — mic, output, and signal each a tap away — set your speakers while the tone plays. Pink noise for speaker levels, white noise for checks, octave-band tones for finding what a room does — no second app, no test-tone downloads.
The built-in mic gives you a close estimate — plenty to set speaker levels or settle an argument about how loud something is. When you need true SPL, plug in a measurement mic and import its calibration file — Level reads through it, corrected — or fit a 94 dB calibrator and tap Set to 94 dB.
The microphone is used to measure level — audio is processed in real time and never recorded, stored, or transmitted. No account, no analytics, no network connection required.
This page serves as the privacy policy for the Level iPhone app.
Free — including reference signals and calibration. No in-app purchases, no account.